Good Morning…

The day started at 7:30am this morning – I was so excited about wrenching on the 280Z that I was gonna get a head start at 2am lastnight! (Side note: from now on it maybe referred to as just ‘280’, we’ll see how it goes…unless i find a name for it – yes, gender-less for now).

Squeek, Squeeeeeeek – Whenever I gave it some gas, there’s always this squeek that shrilled out from under the hood. Not good if you’re looking to turn heads in the bad way.. or trying to impress the parents that this was a good buy :] My Chilton’s Datsun manual is on it’s way, but i couldn’t wait till then. So upon checking the belts, I remembered my brother’s Datsun 510 manual said something about ‘tight..not too tight…1/2″ deflection..’ haha ok, well better than the +1″deflection this thing is giving now. One wheel had a very handy adjustment screw to lift it and give the belt the right tension. I’ll certainly revisit the belts once the manual comes in, but for now….squeek be gone!

‘Ink’ Change – Popped the 280 on ramps, popped the hood, popped off the oil pan nut off with my fingers.. wait.. with my fingers? Yep, it was literally being held tight by crusty oil around it’s edges. Same with the oil filter – only loosely screwed on! nice… Even better was the primordial blacker-than-black ooze now seeing the light of day since who knows when.. 1977? It was like ink, colored from the depths of space, kinda black. 4 quarts of 10w30 high mileage later… pprrrr.

Minor Rust Work – Picked up a can of grey primer rust inhibitor to temporarily patch up the exposed rust spots before the rainy season hits. Already there’s moisture and water beads forming in the morning, so the weather is coming. Sanded some test areas to see how this stuff works. We’ve used some in black and of another brand previously on a motorcycle, but it’s only been 2 months and garaged, so this will be some real world testing. Quick tags on the inner hood (sanded, light rust), driver-side rear quarter panel (not sanded, previously bondo work), and a heavy spot under the passenger-side deck lid (not sanded, literally like a bit from the rust monster). I testing extremes to see what I can get away with.

Tree Sap, Meet Razor Blade – According to wild Bill, the 280 was parked under a tree for 3 years; no the car isn’t a cupcake, and that’s not frosting. But nothing that a good ol’ razor blade can’t handle! Cleaning the windows as a snap, and didn’t think twice about using it on the paint – why? cause the paints eventually going to go anyways. Regardless, sap’s gone and i didn’t even leave a scratch.


Wipers – Again, rains a’comin’! So I began to outfit the new wipers on the holder when.. wait a sec.. this isn’t like modern cars. Yep, it uses a pin, which fortunately, the wiper blade manufacturers have accounted for. There’s a tab that keeps in place, used the floor to help push the pin out – viola. Reversed steps to get the new blades on, and adjusted the wiper height w/ the screw to the motor. Upon sitting in the car, it looks a touch too high, so i’ll have to re-adjust that…test…aaaand the wiper motor doesn’t work. Tracking the problem maybe tomorrow’s effort.

Upcoming – Wheels? Seals? Carpet? Paint? haha let’s spin the wheel! seriously, there maybe some panasports in your future. seriously.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s