Let it rain

This morning’s adventure started out w/ getting three simple plastic pieces installed and hopefully end with a new battery tray and un-cracked center console. Perhaps a bit too ambitious.

Inspect, Inspect, Inspect – I’ve been trying to avoid the rust issue just a little bit longer (at least until the honeymoon phase is over), but you know, you’ve just gotta face it. Luckily this machine truly hasn’t seen much aging, and is pretty rust free – i just don’t want to be surprised. I took another look at the bondo’d driver side rear quarter panel, and it looks like it was a broad dent that just popped back out – almost no crease lines from the dent, just two small holes from which they probably popped it back out. There was some quarter sized surface rust forming, but nothing to be concerned about. One thing i did notice was the brace that holds quarter panel plastic was bent – ah ha! the true nature of the dent showing itself through the remnants of the damage. As you can see, pretty bent out of shape, but nothing a little force won’t correct. Tagged the inner panel w/ rust inhibitor and even did the whole for the antenna.
20111103-100524.jpg

20111103-100533.jpg

20111103-100548.jpg

Engine Cutting Out at Idle – yep. I was going to take the 280z out to pick up the center console from whale-tail Andrew, but it wouldn’t stay idle! The car would start just fine, stay at idle for a little bit, then just slowly drop and drop, then *poof*, cut dead. This morning was no different, it wouldn’t stay at idle. After reviewing yesterday’s air-filter-to-AFM hose, and fusible links I remembered that I didn’t quite fix the squeaking belt noise. Then it hit me – engine cuts / rpms drop when gas is pressed… Engine spins the alternator, alternator converts that mechanical energy into electrical, electricity for spark plugs! Once I tightened up that alternator belt the engine stayed idle and actually ran better – huh, imagine that!

20111103-100447.jpg

20111103-100459.jpg
Ugh! – Damn, can’t wait to get that manual. For anyone putting on the 280z driver side rear quarter panel plastic get your tools out – it’s not just a pop-in job. Long trial-and-error story short, I had to take out the rear deck panels, the deck stand, the seat belt AND the seat belt fastener plate in order to push that thing in. 45min royal pain in the ass. No wonder it wasn’t put back in place! But man, so much cleaner now. Shined up the back plastic as well, and fit that into place – it’s coming together.

20111103-100619.jpg
Here’s Wild Bill! Currently running a great Datsun truck – but take a look in the back! Panasport 15×7 for only $400! They’ve seen better days, needs some new enamel, but hey, $400! And every paragraph referring to wild Bill is not without an exclaimation!
20111103-100630.jpg

2 Replies to “Let it rain”

  1. Hi,
    I was just wondering where you got the body kit for it and if you could get me any information on that. I’m trying to get the same one for my datsun. Thank you so much!
    -Leanna

  2. Excellent website. Plenty of useful information here. I am sending it to a few pals ans
    additionally sharing in delicious. And obviously, thanks to your
    effort!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s