My side view mirrors were in sad shape: loosing its ability to hold position, even after being tightened, so I ventured to eBay for some new ones.
One thing I wanted to keep in mind was using any existing holes in the 280z from the previous side view mirrors.
KDC KT-1370 “RearView MIRROR”
Made in Taiwan
– As the description states, “Raw material = plastic”. (honestly, i can’t remember if that was there previous to purchasing it. I would have really opt’d for metal).
+ Closely fits the original side view mirrors (at least the ones I have)
– Plastic part lines severely apparent
+ Very easy to install
+ Single screw mirror tightening
All you’ll need is a screw driver, and perhaps a dremel / hacksaw to adjust the length of the main screw (see below)
The old mirror…
Quick inspection shows an “Altezza” sticker… nothing to do with Toyota tuning…
The old side view mirror bracket.
Note the difference in length of the mounting pads. Original is on top.
Note the difference in design. There’s a pitch in the old one (right), while the KDS version is flat. This shouldn’t really matter as the mirror itself is adjustable in all directions.
You’ll see a few things in this picture: 1) The supplied screw with the KDS KT-1370 kit is a bit too long, and will end up digging into the door (where there is no hole). 2) If you look close enough, you’ll see that I must have put the side view mirrors on too early after painting… there are spots where the paint has been pushed / rippled. Minor issue, however because the new mounting pad is slightly smaller, it will reveal more.
The Dremel tool made quick work of the main screw, shortening it to proper length as not to dig into the door (~1, 11/16″ including head).
Although the housing and bezel of the old side view mirror is larger, the mirror itself is the same size.
Huh? The driver side door has two additional holes more than the passenger side?! aahh was this a 240z door? My first is that this maybe left over design from the 240z’s classic single side view mirror…or the door was replaced (not likely as the original paint was spot on). Eh, whatevs – let’s install this thing.
While I’m not fond of the shiny black base, it’s not completely hideous either. I do mind more that the mirror’s housing is a dull black, while the base is a shiny black (i mean, come on!). If i have time, i may spray paint them the same black I’ve been using on the rest of the black parts on the car (matte black). Overall, not a bad purchase – you always get what you pay for. We’ll see how these hold up over the course of the year.